Causes of frequent failures of pneumatic tools

There are too many types of pneumatic tools, including pneumatic wrenches, pneumatic screwdrivers, pneumatic grinders, pneumatic grinders, pneumatic belt machines, and pneumatic cutting machines. Pneumatic tools are imported and domestic two types, whether imported or domestic pneumatic tools are manufacturers, machinery manufacturers, the automotive industry to create revenue can not be an indispensable part.
The failure of pneumatic tools may be very small, some are more serious, and even cause a major accident of machine destruction. Experience has shown that severe mechanical failures are often triggered by a number of smaller failures. The reason lies in the neglect of the timely disposal of small faults. Therefore, for mechanical failures, regardless of the size, they should be eliminated in time, so as to maintain the normal performance of the machine and reduce the possibility of causing greater failures. In a sense, the failure of the timely treatment, is to reduce and prevent the failure of a measure. The so-called timely treatment is to carry out regular maintenance and repair of tools in accordance with the maintenance procedures, and the maintenance and repair of various groups shall be carried out as required. The existing maintenance and repair specifications are a summary of many years of practical experience, and are scientific and reasonable. In the absence of major technological advances and innovations, these procedures are the guidance for tool repair and maintenance. The second is to strengthen the regular and irregular inspection of the tools during use, to understand the operation of the tools in time, and to deal with temporary failures in a timely manner. Do not delay the maintenance time due to small failures and do not affect the use, resulting in Greater failure.
With the development of manufacturing technology in the pneumatic tool industry, the main points of attention of pneumatic tools are as follows: First, pay attention to prevent damage, deformation and corrosion of tools during transportation and storage. Second, strict daily maintenance work should be carried out to keep pneumatic tools in good technical condition. The third is to educate operators to use and operate various tools correctly to reduce and prevent failures caused by human errors. Fourth, the tools should be carefully maintained, regular and irregular maintenance should be carried out correctly and reasonably, the tools should be kept clean and clean, the technical status of the tools should be checked regularly, the abnormalities should be handled in time, the loose and out-of-adjustment parts should be tightened and adjusted in time, and some vulnerable parts should be replaced preventively.

More news